The ANSCHÜTZ target bolt action, which is also used in the ANSCHÜTZ series 1710/1712 hunting repeater, has dominated national and international competitions including the Olympic Games and the World Championships in the small bore rifle disciplines. This is a bolt action, rimfire rifle with cam cocking and bolt eccentrically seated in the receiver. The round action features two action screws. The bolt movement, as with all ANSCHÜTZ equipment, is extraordinarily smooth and effortless. The bolt face is set back so that the rim of the cartridge is fully supported by the bolt head. The tried and tested arrangement of claw- extractor and cartridge holder ensures reliable case extraction. The one-piece firing pin has a defined end-stop area to prevent damage from dry firing. The receiver is equipped with an 0.43″ wide, ANSCHÜTZ Wave Style, V-block riflescope mounting dovetail rail. On some models there are additional drilled and tapped holes provided for scope mounting bases and rings. The independent bolt catch, mounted on the left side of the receiver, limits the movement of the bolt and protects the trigger. A gas vent hole on the side of the extractor groove directs the gas safely to the side in the event of cartridge failure. The sliding safety catch on the right hand side, a recent improvement, blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged.
Match 54 bolt action repeater,
Barrel: stainless steel finish
Barrel Length: 18″ medium-weight tapered barrel, threaded 1/2″ x 28 tpi, no iron sight provision, counter-bored crown.
The 5110 Trigger is a 5109 Trigger equipped with trigger weight spring #002946 instead of #007687 which will allow the trigger weight to be factory adjusted to a lighter 500 g.
Gun Weight: 6 lbs 4 oz
Magazine Capacity: 5
Item Number: A1712AVSSMC or 015808
Stock Style: Monte Carlo walnut.
Version: right handed
Adjustment of the trigger shoe (mm): 17
Trigger weight, adjusted (g): 500 g
