Want to setup a long range wireless network for target camera’s, long range communication or long range internet access? This is long range wifi bridge will help you do just that.
The System comes with 2 110v wall outlets (1 for each bridge) that connect to power over ethernet cables which powers these two transmitters/receivers.
Once powered you can connect your internet router (purchased separately) to Unit A and transmit to Unit B significantly extending your wireless network.
Unit B can have a network switch (purchased separately) allowing you to connect various devices with ethernet cables or you can connect via Wifi to the WiFi signals emitted from each device.
Device is pre-configured to bridge a network or advanced users can access the devices settings via a web browser for many more options.
For best results you must not have wifi interference with other wifi networks, The devices has many channels available to get around interference issues. You can quickly change the channel with a button push on each device to to change the channel (both devices must be on the same channel)
Each bridge access point comes with 1 100mbs ethernet port and 1 1000mbps ethernet port for your LAN (local area network)
Short Description
2-Pack 3KM Long-Range Wireless Bridge with 1Gbs Port and 100mbps port, Bracket Mounts, 16DBi High-Gain Antenna, 1200Mbps WiFi Bridge CPE for Network Extension, Outdoor Point-to-Point Wireless Connection, Weather-Resistant, Easy Installation
Long Description
The CPE920S Double Gigabit wireless WiFi bridge is an outdoor CPE Long Range WiFi Extender with a digital tube display that allows for point-to-point pairing through dialing, eliminating the need to access the GUI. This simplifies the setup process, reduces human effort and cost, and provides professional and straightforward long-range wireless coverage, data transmission, and wireless monitoring.
A wireless bridge with a digital display capable of transmitting and receiving at 1200Mbps, supporting automatic networking for point-to-point and point-to-multipoint connections with flexible switching between transmission and reception. It also features WDS networking mode and is compatible with video networks. The maximum transmission speed between two bridges is 1200Mbps, while the maximum achievable network speed is 600Mbps.
Advanced wireless technology has been utilized to optimize video surveillance transmission, ensuring high-speed and smooth video delivery. The underlying wireless driver has been deeply optimized, employing 5.8G IEEE 802.11ac single-band wireless transmission technology for enhanced anti-interference capability and improved stability.
Outdoor wireless bridges adopt low power consumption and high-performance design, the RF index and radiation index are in full compliance with national standards. Supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD), supports 24V POE power supply, is easy to install and deploy, simplifies construction, safe and reliable. Automatically re-pair when power is restored after a power outage.
Point-to-point wireless bridge built-in 16dBm directional antenna, maximum 27dBm can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 5KM.
Features:
1. Support Gigabit,1000Mbps RJ45 LAN port;
2. Long distance 5.8Ghz wireless WiFi transmission;
3. Built-in 16dbi high gain WiFi antenna;
4. Transmission distance up to 3km(Barrier-Free)；
5. IEEE802.11ac IEEE802.11n, IEEE802.11a, IEEE802.3u;
6. The master bridge output WiFi hotspot, but the slave bridge doesn’t support;
7. Dialing to set the master and slave mode, it is easy to setup;
8. Compatible in both WDS networking mode, video network mode;
9. Support point-to-point, point-to-multipoint mode;
10. Dynamic MIMO power saving mode (DMPS) and APSD;
11. Support 24V POE power supply, easy to install and deploy;
12. Support WEB GUI access to manage the device by PC;
13. 1-year warranty, excellent fast customer technical support.
14. FCC ID certification issued by TCB for compliance with US radio standards;
